Seamless steel pipes are manufactured by piercing and rolling a solid round steel billet; the pipe body has no welds, hence the name “seamless.”
They are the most fundamental type of pipe used in pressure pipelines, boilers, oil and gas transmission, and mechanical equipment—and they are also the type that purchasers most often select incorrectly. This is because many people mistakenly believe that “seamless is always better than welded,” resulting in overpaying for low-pressure, large-diameter projects or selecting the wrong steel grade for high-temperature, high-pressure applications.
This article explains everything from definitions, manufacturing processes, comparisons, specifications, selection, and acceptance to pricing, following the sequence of the procurement decision-making process.
I. How Are Seamless Steel Pipes Manufactured?
- The core process can be summarized as follows: solid round billet → heating → piercing → rolling and drawing → sizing → cooling and straightening → trimming the ends → non-destructive testing and hydrostatic testing → bundling and storage.
- Billet Preparation: Continuous-cast round billets or rolled round bars are selected, then peeled, cut to length, and centered to ensure the surface is free of cracks and folds.
- Heating and Piercing: The billet is heated to 1100–1250°C to enter the austenitic range, then pierced by a rotating piercing machine to form a hollow rough tube.
- Rolling and Elongation: Hot rolling (including hot expansion) follows the large-diameter, thick-walled route, offering high output and low cost; cold drawing/cold rolling follows the small-diameter, high-precision route, with outer diameter tolerances as tight as ±0.05 mm, suitable for hydraulic cylinders and precision bushings.
- Finishing and Inspection: After straightening, each tube undergoes eddy current or ultrasonic testing and a hydrostatic test. Upon passing inspection, the tubes are spray-marked and stored in the warehouse.
The manufacturing process directly determines three factors: dimensional accuracy, wall thickness uniformity, and unit price. This is why, for the same outer diameter, cold-drawn tubes are significantly more expensive than hot-rolled seamless steel tubes—the extra cost reflects the precision of the tolerances.
II. Seamless Steel Pipes vs. Welded Steel Pipes: It’s Not a Matter of Which Is Better, but Which Is More Appropriate
| Dimension | Seamless Steel Pipe | Welded Steel Pipe (ERW/LSAW/SSAW) |
|---|---|---|
| Manufacturing Process | Produced by piercing and rolling a solid round billet | Manufactured by forming and welding steel plates or strips |
| Weld Seam | No longitudinal weld seam | Has a longitudinal or spiral weld seam |
| Common Size Range | Generally up to NPS 24–28 | Available in sizes exceeding 100 inches |
| Wall Thickness Uniformity | Slight variations may occur due to the piercing process | Generally more uniform due to controlled steel plate rolling |
| Cost | Higher | Lower, with significant cost advantages for large diameters |
| Typical Applications | High-pressure and high-temperature services, corrosive environments, and precision machinery | Large-diameter water transmission, long-distance oil and gas pipelines, and structural applications |
The conclusion is straightforward:
- High-pressure boilers, refining and petrochemical units, H₂S-containing acidic media, hydraulic cylinders, heat exchanger tube bundles → Choose seamless pipes; welds pose a risk under these operating conditions.
- Large-diameter buried water transmission lines, municipal trunk lines, low-pressure steam systems, and structural columns → Welded pipes (including SSAW spiral pipes and LSAW straight-seam pipes) offer far better value for money than seamless pipes; ultra-large-diameter seamless pipes are simply not economical.
- The notion that “welded seams = poor quality” is incorrect. As long as modern ERW/SAW pipes undergo 100% UT/RT testing on the welds and meet the weld joint strength factors, they can fully replace seamless pipes under design stress conditions.


III. Common Types and Grade Classes of Seamless Steel Pipes
1. Classification by Manufacturing Process
| Type | Key Characteristics | Typical Applications |
|---|---|---|
| Hot-Rolled Seamless Steel Pipe | Wide range of available sizes; suitable for producing thick-walled pipes | Industrial pipelines, pressure piping, and mechanical manufacturing |
| Cold-Drawn Seamless Steel Pipe | High dimensional accuracy and good surface quality | Hydraulic equipment and precision machinery |
| Cold-Rolled Seamless Steel Pipe | High dimensional accuracy and smooth surface finish | Precision instruments and mechanical components |
| Hot-Expanded Seamless Steel Pipe | Larger diameters are achieved through a heating and expansion process | Large-diameter fluid transmission pipelines |
2. Classification by Application Standards and Steel Grades
| Standard / Steel Grade | Key Characteristics | Typical Applications |
|---|---|---|
| ASTM A106 Gr. B | Carbon steel seamless pipe designed for high-temperature service | Steam pipelines, refineries, and industrial piping |
| ASTM A53 Gr. B | General-purpose carbon steel pipe available in both seamless and welded types | Water, air, fire protection, and structural applications |
| API 5L Gr. B–X80 | Pipeline steel grades designed for oil and natural gas transportation | Oil and gas pipeline projects |
| ASTM A333 Gr. 6 | Carbon steel pipe with specified low-temperature impact properties | LNG facilities and pipelines in cold regions |
| ASTM A335 P11/P22/P91 | Chromium-molybdenum alloy steel designed for high-temperature service | Power plant boilers, superheaters, and high-temperature steam pipelines |
| EN 10216 | European standard for seamless steel tubes for pressure purposes, covering ambient, high-temperature, and low-temperature service | Pressure piping, boilers, and industrial equipment |
IV. Calculation of Dimensions, Schedule, and Weight of Seamless Steel Pipes
When purchasing seamless steel pipes, it is necessary to specify the outer diameter, wall thickness, length, applicable standards, steel grade, and delivery condition. Providing only the outer diameter is insufficient to accurately determine the product specifications and provide a quote.
1. DN, NPS, and Outer Diameter
DN and NPS are both nominal size designations and do not correspond to the actual outer diameter of the steel pipe. For example:
| Nominal Pipe Size (NPS) | Actual Outside Diameter (mm) |
|---|---|
| NPS 2 | 60.3 |
| NPS 4 | 114.3 |
| NPS 6 | 168.3 |
| NPS 8 | 219.1 |
2. What is Schedule (SCH)?
SCH is a code indicating the wall thickness grade of steel pipe; it does not represent a specific value in millimeters. For the same NPS size, SCH 40 and SCH 80 have the same outer diameter but different wall thicknesses.
For example, NPS 6:
| Wall Thickness Schedule | Outside Diameter (mm) | Wall Thickness (mm) |
|---|---|---|
| SCH 40 | 168.3 | 7.11 |
| SCH 80 | 168.3 | 10.97 |
3. Calculation of Theoretical Weight
Formula for calculating the theoretical weight of seamless carbon steel pipes:
- Weight per meter (kg/m) = 0.02466 × wall thickness × (outer diameter − wall thickness)
Example: Φ89 × 4.5 mm seamless steel pipe:
- Weight per meter = 0.02466 × 4.5 × (89 − 4.5) ≈ 9.38 kg/m
- The weight of a single 12-meter length is approximately 112.56 kg.
V. Selection Logic: Consider Operating Conditions First, Then Price
- Design Pressure → Determine wall thickness/Schedule; for high pressure, increase the SCH.
- Operating Temperature → Use A106/A53 for carbon steel at ambient temperatures; use A335 P11/P22 for temperatures >400°C; use A333 Gr.6 for temperatures below -45°C.
- Transported Medium → Use API 5L for oil and gas (PSL2 for acidic service + NACE MR0175); use A106 or GB 5310 for steam boilers; use cold-drawn precision tubing for hydraulic systems.
- Buried Installation/Corrosion → Seamless carbon steel pipes installed underground must be equipped with external corrosion protection (3PE, epoxy powder, etc.); if the internal medium is corrosive, consider a lining or stainless steel.
- Diameter → For diameters exceeding NPS 24–28, do not insist on seamless pipes; it is more cost-effective to use welded pipes instead.
VI. Acceptance and Required Documentation
- MTC (Material Test Certificate) (EN 10204 3.1; third-party witness required per 3.2)
- Chemical Composition Report (For alloy pipes and stainless steel, PMI spectral re-inspection is recommended)
- Mechanical Properties Report (Tensile strength, yield strength, elongation; Charpy impact test for low-temperature pipes)
- Dimensional Inspection Report (Outer diameter, wall thickness, bend, ovality)
- Hydrostatic Test Report + Non-Destructive Testing Report (UT/ET; grades in accordance with GB/T 5777 or the corresponding ASTM clauses)
- Surface Inspection Record (no cracks, folds, scabs, or excessive scale)
VII. What Causes Price Differences
For seamless carbon steel pipes of the same Φ219×8 specification, price quotes from different manufacturers can vary by more than 15%. The main factors are:
- Steel billets/alloying elements: 15CrMoG is 30–50% more expensive than 20#/A106, and 316L stainless steel is 4–6 times more expensive than carbon steel.
- Processing: Cold-drawn > Hot-rolled > Hot-expanded.
- Grade Standards: API 5L PSL2 > PSL1; A335 P91 > P22 > P11.
- Inspection Scope: Individual UT testing + hydrostatic testing + third-party witnessing—each adds to the cost.
- Quantity and Cut-to-Length: Cut-to-length processing results in scrap loss, leading to significantly higher unit prices for small batches.
- Packaging and Shipping: Export-grade steel band strapping + rust-preventative oil + pipe caps, plus fumigation of wooden crates—all of which are actual costs.



